Lookup failed fallout 4 как исправить ошибку
Если кто не решил проблему, попробуйте просто удалить (переместить в другое место) файлы из папки Data/Strings. Мне помогло. Информация взята из другого источника.
I ran into this issue after patch 1.7 and did a lot of a searching to find the right fix.
I finally found this on a different mod site in their post about the 1.7 update patch.
Quote
IMPORTANT . localization files (strings) for the Data / strings was removed, now all language games localization files will Fallout4 file — Interface.ba2. That is, you will need to remove the strings folder for Data / Strings
So, I deleted the strings folder from /fallout 4/data.
As I install all my mods manually I went and edited the Fallout4.ini file in /username/Documents/My Games/Fallout 4 too.
I simply removed «STRINGS,» from the line…
sResourceDataDirsFinal=TEXTURES, MUSIC, SOUND, INTERFACE, MESHES, PROGRAMS, MATERIALS, LODSETTINGS, VIS, MISC, SCRIPTS, SHADERSFX
I keep the Fallout4.ini file read only to prevent some of my game tweaks from being undone so I had to turn that off to edit it, then change it back.
About this mod
If you’re using the Full Dialogue Interface mod, then chances are you’re getting LOOKUP FAILED! on some of the new creation club content. This will fix the problem for you.
Updated for Fallout 4 version 1.10.163
The Full Dialogue Interface mod replaces some files in the data/strings folder in order to function. With the recent update 1.10.2 you will find that some of the new Creation Club content will have LOOKUP FAILED! instead of the proper name. This mod will replace the strings with updated versions to correct the issue.
Thanks for the positive comments and endorsements, I really appreciate them!
Download the latest version of the mod from the files tab Or if you really want to:
see the guide below on how to create your own string files, (thanks to Crimsomrider for the original text)
Here’s how to fix LOOKUP FAILED errors.
— Download xTranslator from the Nexus
— Extract it wherever you want
— Go to your Fallout 4 folder > DATA > STRINGS and find the following string files:
— Move them somewhere else, preferably the desktop for the moment.
— Open the program (xTranslator.exe) and select Fallout 4
— The «Set Options and Languages» window should show up on the first run of the program,
— (if not, it’s in Options > Dictionaries and Languages) Here, Change the destination language to EN and click OK
— In the top left corner click FILE > LOAD ESP/ESM
— Load Fallout 4.esm
— Once it loads, click on TOOLS on the right > LOAD .STRINGS AS TRANSLATION.
— Choose the Fallout4_en.STRINGS file which you previously removed from your data folder
— A new pop up window will open, select EVERYTHING and accept
— Once it’s done, click on FILE in the top corner > FINALIZE STRINGS
-After the process, delete the outdated string files from the desktop that you moved from the DATA folder and you’re done.
Если кто не решил проблему, попробуйте просто удалить (переместить в другое место) файлы из папки Data/Strings. Мне помогло. Информация взята из другого источника.
I ran into this issue after patch 1.7 and did a lot of a searching to find the right fix.
I finally found this on a different mod site in their post about the 1.7 update patch.
Quote
IMPORTANT . localization files (strings) for the Data / strings was removed, now all language games localization files will Fallout4 file — Interface.ba2. That is, you will need to remove the strings folder for Data / Strings
So, I deleted the strings folder from /fallout 4/data.
As I install all my mods manually I went and edited the Fallout4.ini file in /username/Documents/My Games/Fallout 4 too.
I simply removed «STRINGS,» from the line…
sResourceDataDirsFinal=TEXTURES, MUSIC, SOUND, INTERFACE, MESHES, PROGRAMS, MATERIALS, LODSETTINGS, VIS, MISC, SCRIPTS, SHADERSFX
I keep the Fallout4.ini file read only to prevent some of my game tweaks from being undone so I had to turn that off to edit it, then change it back.
I only have the base game, so I have very little mods. Using TruBy9, Full Dialogue Interface and the one that lets achievements track with mods. That’s it.
Some items and some loading screen tips are failing to load with the LOOKUP FAILED! error message.
I have tried some suggested fixes posted online including Both manual and mod manager methods of this fix and I even tried this one. Full Dialogue Interface seems to be the culprit, but it’s kind of an essential mod. Is there an alternative that doesn’t has this error?
Thanks for any help.
EDIT: First off, thanks to everyone who replied and hello to all the future troubleshooters who will stumble upon this post seeking answers.
After following some suggestions below I managed to get rid of the LOOKUP FAILED! error, although it did require me to drop the FDI mod for an alternative.
My full fix method went as follows.
Full clean reinstall, including config files.
Deleting old save data.
Using XDI (linked above) instead of FDI.
That’s what worked for me, but some suggestions below contain possible workarounds to keep FDI.
- Гайды
- 6
Lookup failed fallout 4 как исправить
Читайте также:
комментариев 6
- Комментарии 6
- Пингбэки 0
Изменение внешности персонажей с помощью Face Ripper и Fo4edit
tundruck73 (ЛС/PM)
Все файлы tundruck73
Автор: tundruck73
Распространение: Свободное распространение
Обсуждение Fallout 4 на форуме игры.
Добавлено: 07 Марта 2016 в 19:55
| Отредактировано:
Просмотров: 38370 | Комментарии: 133
Понравилось: 76 пользователям
Многим, и мне в том числе, не нравится внешность некоторых персонажей Fallout4, именно по этой причине на просторах сети появилось огромное количество модов-реплейсеров, которые изменяют либо одного-двух NPC (чаще всего компаньонов), либо вообще все население Содружества. Ниже я попытаюсь в доступной форме объяснить, как сделать такой мод своими силами.
В качестве примера попробуем изменить внешность Пайпер, эта дама, наверное, чаще других становится объектом косметического рестайлинга. Для того, чтобы сделать это, нам нужно скачать и установить две программы. Во-первых, Fo4edit, который можно найти здесь:
http://modgames.net/load/fallout_4/instrumentarij/fo4edit/433-1-0-20619
Во-вторых, Face Ripper, скачиваем его отсюда:
http://modgames.net/load/fallout_4/instrumentarij/fallout_4_face_ripper/433-1-0-20755
Создаем ярлык Fo4edit.lnk и в его свойствах через пробел дописываем -cp:utf-8 -l:ru.
Подготовка закончена, можно приступать к решению основной задачи. Запускаем Fo4edit, жмем ПКМ в окне Master/Plugin Selected и выбираем в выпадающем меню пункт Select none, эта операция уберет “галки” со всех файлов. Отмечаем “галкой” файл Fallout4.esm и нажимаем кнопку OK. Когда загрузка закончена, открываем этот Fallout4.esm двойным кликом ЛКМ и находим в списке категорию Non-Player Character (Actor) и открываем ее тоже. В колонке Name нажимаем на заголовок, чтобы рассортировать персонажей и существ в алфавитном порядке, после этого нам будет совсем несложно найти Пайпер. Вот она:
Нажимаем на Пайпер ПКМ и выбираем в выпадающем меню пункт Copy as override into… Программа спросит, действительно ли мы хотим что-то изменить, отвечаем утвердительно. После этого появится окно, где нам будет предложено скопировать запись с Пайпер в новый esp-файл (там нужно поставить “галку”), а в следующем окне -ввести имя нового файла. Я назвал его a1PiperRestyle:
Fo4edit сообщит нам, что Fallout4.esm будет являться для нашего esp материнским мастер-файлом, согласимся с этим и закроем программу.
Теперь нам нужно создать Пайпер новую внешность. Для этого мы можем либо воспользоваться уже сделанным кем-то сохранением, на сайте “Нексус” достаточно большой выбор таких файлов:
http://www.nexusmods.com/fallout4/mods/searchresults/?src_cat=32
либо запустить игру и набрать в консоли slm player, открыв таким образом редактор персонажей. Нажимаем клавишу “В”, а затем “Escape”, чтобы получить возможность редактировать лицо своего персонажа, после чего создаем ему новую внешность, допустим, вот такую:
Сохраняем игру и выходим из нее.
Теперь нам нужно портировать внешность персонажа из сохранения в наш esp-файл. Запускаем программу Face Ripper, нажимаем кнопку Browse рядом с верхним окном. Откроется папка с сохранениями, где нам нужно выбрать то из них, которое мы только что сделали. После этого нажимаем кнопку Browse рядом с нижним окном и ищем в папке Data наш a1piperRestyle.esp (сейчас в нем только одна запись, поэтому с поиском нужного персонажа проблем не возникнет, но в случае, если мы захотим изменить внешность нескольких NPC, нам нужно будет знать их FormID, эту информацию можно получить, открыв Fo4edit). Нажимаем кнопку Transfer Face, а потом, когда появится окно с сообщением Done, жмем OK.
Дело сделано, но есть один нюанс: Face Ripper портирует внешность не в наш esp, он создает его копию с измененным именем, вот она, лежит в папке Data:
Переименовываем эту копию в a1newPiper.esp, отмечаем ее “галкой” в NMM и запускаем игру, чтобы посмотреть на результат наших трудов. Вот, что у меня получилось:
Описанным выше способом вы можете изменить внешность любого персонажа в игре, используя в качестве “донора внешности” не только сохранения, но и esp-файлы, если в них есть NPC, облик которых пришелся вам по душе, а с помощью Fo4edit можно поменять также пол и расу. Если вас интересует, как это сделать, спрашивайте, постараюсь ответить.
Для скачивания необходима авторизация
Fallout 4 lookup failed как исправить
If you have the problem, that, after you changed the language of your game, you see "Lookup Failed!" a lot, than this guide might help you.
Falls du das Problem hast, dass, nachdem du die Sprache deines Spiels geändert hast, du häufig "Lookup Failld!" siehst, dann könnte dieser Guide dir helfen.
1,651 | уникальных посетителей |
8 | добавили в избранное |
Hey Guys,
I recently wanted to play Fallout 4 in german, so I changed the language from english to germand via the properties-window. But when I started the game (with the new language installed) and was about to create a new character I got a popup saying "Lookup Failed!". Later I realized, that those were the tutorial-popups, at that moment I believed it a smal bug which wouldn’t bother me later on. I proceded to customize my character and saw, that every item-entry in every selection-window (e.g. the one of the haircuts) said "Lookup Failed!". And when I had finished the customization every action and every object had no name but "Lookup Failed!".
- Navigate in your window-browser to the place where you saved Fallout 4. (You can also get there by opening the game-properties of Fallout 4 in Steam, go to the tab "LOCAL FILES" and click on "BROWSE LOCAL FILES".)
- Now navigate first to the "Data" Folder, then to the "Strings" folder. In this folder there should be 3 files, all called something like Fallout4_de and with some string-file-type.
- Just rename the files to Fallout4 and leave the file-type untouched. (You should have the files Fallout4.DLSTRINGS, Fallout4.ILSTRINGS and Fallout4.STRINGS.)
Hey Leute,
ich wollte neulich Fallout 4 auf Deutsch statt auf Englisch spielen und hab die Sprache über das Eigenschafts-Fenster von Steam geändert. Als der Download fertig war und ich in der Charakter-Erstellung war hatte ich auf einmal ein Popup mit dem Inhalt "Lookup Failed!". Zu dem Zeitpunkt dachte ich, dass es irgendein kleiner Bug ist, der mich später nichtmehr kümmert, eigentlich war es ein Tutorial-Popup. Während der Charakter-Erstellung begegnete mir dann diese Meldung noch ein paar mal, unter anderem war jede Frisur mit "Lookup Failed!" betitelt, und als ich fertig war merkte ich, dass jedes Objekt und jede damit verbundene Aktion mit "Lookup Failed!" betitelt war.
LOOKUP FAILED — Full Dialogue Interface and Creation Club Fix
If you’re using the Full Dialogue Interface mod, then chances are you’re getting LOOKUP FAILED! on some of the new creation club content. This will fix the problem for you.
Author’s instructions
File credits
This author has not credited anyone else in this file
Donation Points system
This mod is opted-in to receive Donation Points
Updated for Fallout 4 version 1.10.163
The Full Dialogue Interface mod replaces some files in the data/strings folder in order to function. With the recent update 1.10.2 you will find that some of the new Creation Club content will have LOOKUP FAILED! instead of the proper name. This mod will replace the strings with updated versions to correct the issue.
Thanks for the positive comments and endorsements, I really appreciate them! 🙂
Download the latest version of the mod from the files tab
Or if you really want to: see the guide below on how to create your own string files, (thanks to Crimsomrider for the original text)
Here’s how to fix LOOKUP FAILED errors.
— Download xTranslator from the Nexus
— Extract it wherever you want
— Go to your Fallout 4 folder > DATA > STRINGS and find the following string files:
— Move them somewhere else, preferably the desktop for the moment.
— Open the program (xTranslator.exe) and select Fallout 4
— The «Set Options and Languages» window should show up on the first run of the program,
— (if not, it’s in Options > Dictionaries and Languages) Here, Change the destination language to EN and click OK
— In the top left corner click FILE > LOAD ESP/ESM
— Load Fallout 4.esm
— Once it loads, click on TOOLS on the right > LOAD .STRINGS AS TRANSLATION.
— Choose the Fallout4_en.STRINGS file which you previously removed from your data folder
— A new pop up window will open, select EVERYTHING and accept
— Once it’s done, click on FILE in the top corner > FINALIZE STRINGS
-After the process, delete the outdated string files from the desktop that you moved from the DATA folder and you’re done.
Lookup Failed
Приветствую, камрады.
Никто не сталкивался с такой проблемой (см. скриншот). Причем такое только на клетках и шестах, с тентами и остальными постройками нет никаких проблем.
Внезапно нашел проблему. Такое вытворяет любой мод который меняет вид диалогов.
- пожаловаться
- скопировать ссылку
Григорий Алхимчиков
Все верно! Что бы исправить эту гадость, необходимо отключить мод, и вернуть тупой формат диалогов(
- пожаловаться
- скопировать ссылку
Если кто не решил проблему, попробуйте просто удалить (переместить в другое место) файлы из папки Data/Strings. Мне помогло. Информация взята из другого источника.
I ran into this issue after patch 1.7 and did a lot of a searching to find the right fix.
I finally found this on a different mod site in their post about the 1.7 update patch.
Quote
IMPORTANT . localization files (strings) for the Data / strings was removed, now all language games localization files will Fallout4 file — Interface.ba2. That is, you will need to remove the strings folder for Data / Strings
So, I deleted the strings folder from /fallout 4/data.
As I install all my mods manually I went and edited the Fallout4.ini file in /username/Documents/My Games/Fallout 4 too.
I simply removed "STRINGS\," from the line.
sResourceDataDirsFinal=TEXTURES\, MUSIC\, SOUND\, INTERFACE\, MESHES\, PROGRAMS\, MATERIALS\, LODSETTINGS\, VIS\, MISC\, SCRIPTS\, SHADERSFX\
I keep the Fallout4.ini file read only to prevent some of my game tweaks from being undone so I had to turn that off to edit it, then change it back.